steve114 這裡是私人庫藏處。 以首選軟體為首要。 更新的版本多放在以下。 http://mypaper.pchome.com.tw/news/steve112/ 或 http://mypaper.pchome.com.tw/news/steve113/ 以下是預備處，存放的供重灌用 http://mypaper.pchome.com.tw/news/steve115/

154愛的鼓勵 2訂閱站台

解決svchost.exe吃掉所有CPU資源的方法


[教學] 解決svchost.exe吃掉所有CPU資源的方法
一、首先檢查系統服務的狀態。
1. 點「開始」–>「執行」，輸入「services.msc」後按「確定」。
2. 在服務「Automatic Updates」上點二下。
3. 點選「登入」頁籤，確定登入身分為「本機系統帳戶」且「允許服務與桌面互動」“沒有”被選取。
4. 確認服務已在目前的「硬體設定檔」中被啟用，如果沒有，按下「啟用」按鈕。
5. 點選「一般」頁籤，確定「啟動類型」為「自動」，然後按下「啟動」按鈕以啟動服務。
6. 對「Background Intelligent Transfer Service (BITS) 」服務重覆2 ~ 5的步驟。
二、接著重新註冊Windwos Update的元件。
1. 點選「開始」–>「執行」。
2. 輸入「REGSVR32 WUAPI.DLL」後按Enter。
3. 當看到“DllRegisterserver 在WUAPI.DLL成功” 的訊息後按下「確定」。
4. 重覆上述步驟重新註冊下列元件
REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 ATL.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUWEB.DLL
三、最後更名可能已損壞了的windows Update暫存目錄。
1. 點「開始」–>「執行」，輸入「cmd」後按「確定」。
2. 在命令提示字元中鍵入以下指令。（若出現錯誤訊息請先重開機後再報執行一次）
net stopWuAuServ
2. 點「開始」–>「執行」，輸入「%windir%」後按「確定」。
3. 找到「SoftwareDistribution」並更名為「SDold」。
4. 點「開始」–>「執行」，輸入「cmd」後按「確定」，並在在命令提示字元中鍵入以下指令。
net start WuAuServ
四、大功告成！
--------------------------------------------------------------------------------
以下是原文:
1. Click Start->Run, type &quotservices.msc&quot (without quotation marks) in the
open box and click OK.
2. Double click the service &quotAutomatic Updates&quot.
3. Click on the Log On tab, please ensure the option &quotLocal System account&quot
is selected and the option &quotAllow service to interact with desktop&quot is
unchecked.
4. Check if this service has been enabled on the listed Hardware Profile. If
not, please click the Enable button to enable it.
5. Click on the tab &quotGeneral " make sure the &quotStartup Type&quot is &quotAutomatic&quot.
Then please click the button &quotStart&quot under &quotService Status&quot to start the
service.
6. Repeat the above steps with the other service: Background Intelligent
Transfer Service (BITS)
Step 4: Re-register Windows Update components and Clear the corrupted
Windows Update temp folder
1. Click on Start and then click Run,
2. In the open field type &quotREGSVR32 WUAPI.DLL&quot (without quotation marks) and
press Enter.
3. When you receive the &quotDllRegisterServer in WUAPI.DLL succeeded&quot message,
click OK.
4. Please repeat these steps for each of the following commands:
REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 ATL.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUWEB.DLL
After the above steps are finished. Sicne temporary folder of Windows Update
may be corrupted. We can refer to the following steps to rename this folder
that
1. Click Start, Run, type: cmd and press Enter. Please run the following
command in the opened window.
net stop WuAuServ
(note, you might need to reboot before the net stop command will work)
2. Click Start, Run, type: %windir% and press Enter.
3. In the opened folder, rename the folder SoftwareDistribution to SDold.
4. Click Start, Run, type: cmd and press Enter. Please run the following
command in the opened window.
net start WuAuServ
You are done!