老賓士BENZ的家_翡翠蛙的大衛營

0愛的鼓勵 0訂閱站台

賓士變速箱一下子還有很多文章要放

先從檢查液面高低來吧!

原廠對這部份是很計較的喔

Oil capacity

變速箱ATF容量

Oil level checking procedure

液面高低檢查程序

Park vehicle on level surface to check the oil level
Check the transmission for leaks before checking the oil level	If oil loss is severe, determine and eliminate cause.
Open locking lever (6a)	Up to 09/93 (illustration 1)
Press locking pin (6b) to one side in direction of arrow, remove both parts and open locking lever (6a)	As of 10/93 (illustration 2)
Pull out dipstick (6)	Wipe off with fluff-free cloth
Insert oil dipstick (6) up to the stop, pull out again and read off oil level.	When the transmission is cold, (transmission oil temperature approx. 30 deg C) the display must be between the "min" and "max" marks for the correct oil level (illustration 4). When the transmission is at operating temperature (transmission oil temperature approx. 80 deg C) the display must be at the "max" mark for the correct oil level.
Correct oil if necessary	Re-check oil level once again.
Close locking lever (6a) and insert locking pin (6b) until it engages	Insert oil dipstick (6) so that the locking clip (6a) is easily accessible and does not contact anywhere.

變速箱各螺絲鎖緊磅數